Paint & Hobby | Adhesive & Finishing
Citadel: Tools - Plastic Glue
Designed specifically for assembling plastic Citadel miniatures, Citadel Plastic Glue comes in a bottle with a handy applicator nozzle, making it as easy as possible to put your models together.
$12.00$10.00
-
Tamiya Extra Thin Quick Set Plastic Cement 40ml
Tamiya Extra Thin Cement is a widely popular glue among modelers around the world. You will find it in most modeler’s workshops. This version is the “quick setting” variant that dries around 4 times faster than the original Tamiya Extra Thin Cement, saving you time (and energy) holding parts in place! It also has less-tendency to seep out from part joints.Like the consistently of the original Extra Thin Cement product, the Quick Setting version is highly liquid and able to flow into small cracks, making it useful for attaching parts in very tight spaces. It can also be used to attach parts which have been pre-fitted by hand.Modeling Tip:It is best to use the Quick Setting Extra Thin Cement when you are looking to glue parts together very quickly, in order to move onto the next step of the building process faster. It is also recommended that you are sure of your parts attachment and fit when using this faster setting glue. The Quick Setting Cement typically dries in under 10 seconds, whereas the standard Extra Thin Cement dries within 40 seconds of application.• Contents: 40ml. Bottle features a handy brush on the underside of the cap for easy application.• Note: Not for use with elastomer (used on tank track parts, etc.) as it can cause brittleness.• Original Tamiya Extra Thin Cement (Item 87038) is still recommended for use in situations where you wish to fill larger gaps and seams.
$7.00
-
BSI - Insta-Cure+ Superglue 1/2 oz
Insta-Cure+™ is a higher viscosity CA for loose fitting joints in which the adhesive must bridge gaps. Normally, the thicker CA is applied to one surface and then the parts are held tightly together for about 5 to 15 seconds. For large surface areas, including those with close fitting joints such as laminations, INSTA-CURE+ ™ should also be used. To prevent premature curing, don’t spread the glue into a thin film. Lay down a serpentine bead with about 1" separations on one surface, then assemble the parts, letting the pressure spread the CA out.
$5.00
-
BSI - Maxi-Cure Superglue 1/2 oz
Maxi-Cure™ extra thick CA is the best CA for most plastics, including GE’s Lexan MAXI-CURE™ is the best choice for plastic model assembly. When used with INSTA-SET™, it works better than any putty for modifying or filling voids. It can be carved with a knife or razor blade and sanded and feathered to form a finish indistinguishable from plastic. MAXI-CURE™ bonds fiberglass, hardwood, metal and rubber better than any other hobby adhesive. For gluing to the inside, clothtextured surface of fiberglass, scrape the area to be bonded with a razor blade or coarse sandpaper before using MAXI-CURE™ or any other adhesive. It also is best for bonding the tires for R/C cars. MAXI-CURE™ has proven to be very popular in the archery business for the fletching of vanes onto aluminum and carbon arrow shafts. Along with being the strongest, MAXI-CURE™ is usually the least expensive option for this application.
$7.00
-
BSI - Maxi-Cure Superglue 2 oz
Maxi-Cure™ extra thick CA is the best CA for most plastics, including GE’s Lexan MAXI-CURE™ is the best choice for plastic model assembly. When used with INSTA-SET™, it works better than any putty for modifying or filling voids. It can be carved with a knife or razor blade and sanded and feathered to form a finish indistinguishable from plastic. MAXI-CURE™ bonds fiberglass, hardwood, metal and rubber better than any other hobby adhesive. For gluing to the inside, clothtextured surface of fiberglass, scrape the area to be bonded with a razor blade or coarse sandpaper before using MAXI-CURE™ or any other adhesive. It also is best for bonding the tires for R/C cars. MAXI-CURE™ has proven to be very popular in the archery business for the fletching of vanes onto aluminum and carbon arrow shafts. Along with being the strongest, MAXI-CURE™ is usually the least expensive option for this application.
$9.00
-
Citadel: Tools - Liquid Green Stuff
Ideal for filling in small gaps on miniatures, Liquid Green Stuff has been designed for hobbyists and enthusiasts who want a smooth, even finish when converting or modifying their models. Water soluble, with a striking label making it stand out from your Citadel paints, Liquid Green Stuff can be easily filed down with a Citadel File once set. Contains 12ml of Liquid Green Stuff.
$11.00$9.00
-
Tamiya Plastic Cement 20ml
This cement is for use in assembling plastic (styrene) models. It comes is a stable hexagonal bottle 47mm tall.Contents: 20ml.Features a brush for application on the reverse side of the cap.Working time between 1-2 minutes. Fully cures in 24 hours.
$8.00
-
Army Painter: Tools - Battlefield Basing Glue
This special non-toxic glue is used for glueing rocks, sand, grass or similar to a miniature base. Also perfect for glueing polyfoam for scenery.- USE FOR ALL BATTLEFIELD TYPES OF BASING- NON-TOXIC- ALSO PERFECT FOR SCENERY
$8.00$6.00
-
BSI - Insta-Set Accelerator 2 oz
INSTA-SET™ is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. INSTA-SET™ in a spray bottle is normally used to cure the CA that flows from joints when parts are pressed together. Applying an additional bead of thick CA along a seam and then curing it with INSTA-SET™ significantly enhances a joint’s strength. For difficult to bond materials, INSTA-SET™ can be applied to one surface and CA to the opposite surface. When brought together, they will bond instantly. INSTA-SET™ is formulated with a strawberry scent and activates CA in 6 to 8 seconds without any degrading of the CAs strength, which can occur with many other accelerators. It is compatible with all surfaces, even clear plastic and white foam.
$8.00
-
Army Painter: Tools - Super Glue
Also known as cyanoacrylate - this is super glue at its best. Medium thickness and high quality, this Super Glue is ideal for miniatures and small parts due to its precision tip. Creates a very strong bond between the parts being glued.
$8.00$6.00
-
Vallejo: 71.161 Airbrush Thinner 200ml
Airbrush Thinner is used to extend the colors, increase fluidity and delay their drying time. It does not alter the properties of the colors. We recommend the addition of a few drops of Thinner to the colors while airbrushing.
$21.00$18.00
-
BSI - Insta-Cure Super Thin 2 oz
Insta-Cure™ has a water-thin viscosity that wicks deep into joints by capillary action and cures in a matter of a few seconds. Surfaces to be bonded must be tight fitting and should be held together while you apply the CA around the edges of the seam. At the moment CAs cure, they give off a vapor that can irritate the nose and eyes, so be prepared. Thin CAs work very well on balsa since they penetrate into the wood and form more than just a surface bond.
$9.00
-
Vallejo: 70.524 Thinner Medium
Thinner Medium for Model Color, Panzer Aces and Game Color. Thinner used to extend the colors, to increase fluidity and delay the drying time.
$5.00$4.00
-
Vallejo: 71.562 Airbrush Flow Improver 200ml
Airbrush Flow Improver is a medium to improve the flow and delay the drying of paint on the needle while airbrushing. It is recommended to add 1-2 drops of Flow Improver to 10 drops of paint in the cup of the airbrush. Please see also certified safety information of the product on the Safety sheet.
$19.00$16.00
-
Army Painter: Tools - Plastic Glue
Also known as polystyrene cement, this special glue will mend and make attractive bonds between plastic parts of any miniature. Once dry, the miniature parts are fused together for a strong joint.
$5.00
-
Vallejo: 70.523 Liquid Mask
Liquid Mask is used to reserve areas which are to remain unpainted, especially in airbrush techniques, but also with watercolors and temperas. The product forms a protective film on the area which the artists does not want to paint. Once the work is dry, liquid mask is rubbed off with an eraser or piece of cloth, revealing the unpainted area.
$5.00$4.00
-
Vallejo: 71.199 Airbrush Cleaner 200ml
Airbrush Cleaner is an indispensable product for cleaning the airbrush. It not only eliminates rests of the color used, but at the same time lubricates the interior of the airbrush without damaging the mechanism. Please see also certified safety information of the product on the Safety sheet.
$15.00$12.00
-
BSI - Un-Cure Debonder 1 oz
UN-CURE™ debonder will soften cured CA. If parts are bonded incorrectly or your fingers are stuck together, a few drops of UN-CURE™ will dissolve the CA in about a minute. Apply on bonded skin and roll apart fingers. Once stuck, use acetone to clean off softened CA, then wash off with soap and water. Since cured CA is essentially acrylic plastic, anything that will dissolve CA will also soften most plastics. Care must be used, therefore, when using Un-Cure on plastics. Separating plastics parts with a razor saw is usually the best option.
$6.00
-
Vallejo: 71.261 Airbrush Thinner
Airbrush Thinner is used to extend the colors, increase fluidity and delay their drying time. It does not alter the properties of the colors. We recommend the addition of a few drops of Thinner to the colors while airbrushing.
$5.00
-
Vallejo: 73.212 Decal Softner
Decal Softener is a medium which protects the decal and smoothes its edges so that they blend with the surface of the model. Decal Softener also softens the decal to adapt it to surface details such as recessed lines, raised edges, screws or bolts.
$5.00$4.00
-
Black Friday - Army Painter: Warpaints Effects - Anti-Shine Matt Varnish
The Warpaints range of high pigment colours can be used for miniatures from any period, any size and any system. Get your army painted fast using the Army Painter System and get more time for gaming! Utilizing loads of heavy pigment for an excellent coverage the Warpaints has been specifically designed to compliment an already existing range; this paint is a 100% match of the Colour Primer of the same name.
$6.00$4.00
-
Vallejo: 73.213 Decal Fix
Decal Fix cleans and prepares the model surface before placing decals and wet transfers, improves adherence of the decal, and prevents formation of air bubbles without need for a previous coat of varnish.
$5.00$4.00
-
Vallejo: 73.214 Chipping Medium
Chipping Medium is a waterbased medium to create flaked paint, scratches, and rust chips. Chipping Medium can be applied with airbrush or brush to create chipping effects with waterbased acrylic colors.
$5.00$4.00
-
Vallejo: 71.361 Airbrush Thinner 60ml
Airbrush Thinner is used to extend the colors, increase fluidity and delay their drying time. It does not alter the properties of the colors. We recommend the addition of a few drops of Thinner to the colors while airbrushing.
$11.00$9.00
-
Acrylic Thinner - 250ml
250ml of acrylic thinner. Renewed solvent, new composition is alcohol-free and non-flammable.
$34.00
-
Tamiya Masking Tape 6mm
Tamiya Masking Tape is thin, very strong adhesive tape for modeling use. It even adheres well to uneven surfaces. It's ideal when sharp and crisp lines are required. This tape will not absorb paint color, or leave unsightly marks, making it perfect for use with painted or unpainted scale plastic or radio control models.
$9.00
-
Vallejo: 70.597 Retarder Medium
Matt acrylic water-based colors, especially formulated for airbrushing. Each color has been meticulously developed in collaboration with model painters who are specialists in fantasy figures and dioramas. Most of the colors in Game Air have their equivalents in Game Color, so that the modeler can combine both formulations and work simultaneously with a brush or an airbrush. Game Air can be used directly or diluted with Vallejo Airbrush Thinner and Flow Improver. It is recommended to apply the colors in several layers on a previously primed surface. The colors preserves all the smallest detail of the model, they dry very quickly and after a few hours form a homogenous film of extraordinary resistance.Game Air performs exceptionally well on all surfaces; the adherence of the colors on resin, plastic, steel and white metal is extraordinary. Compressor adjustment for these colors is recommended at 15 – 20 PSI or 0.5 a 1 kg. For best airbrush maintenance we recommend using the Vallejo Airbrush Cleaner.Safety: Game Air is not flammable, and does not contain solvents. Please see also certified safety information of the product on the Safety page.Packaging: Game Air is presented in bottles of 17 ml./0.57 fl.oz. with eyedropper. This packaging prevents the paint from evaporating and drying in the container, so that It can be used in minimal quantities and preserved for a long time.
$5.00$4.00
-
Vallejo: 70.598 Crackle Medium
Crackle Medium is a waterbased medium, used between two coats of paint to create a weathered effect, or as a final coat to create a transparent crackled surface.
$5.00$4.00
-
Tamiya Masking Tape 1mm
This slim 1mm masking tape can be used on subjects such as plastic and R/C models. PET plastic covers help prevent distortion and allow minimal dust to settle on the tape for superior longevity. The tape is exceedingly useful in any masking situation, but particularly in fine paint jobs or intricate and complex livery designs.• Product contains one 18-meter roll of masking tape.• Tape is made from the same easy-to-use paper material employed in Tamiya popular masking tape Items 87030-87035. It can be easily and neatly cut using scissors or modeling knife.• PET plastic covers help prevent distortion and allow minimal dust to settle on the tape for superior longevity. They are stuck to the roll’s plastic core.
$5.00
-
BSI - Insta-Set Accelerator 6.75 oz
This item cannot be shipped with USPS Priority Mail or UPS 3-Day Select. INSTA-SET™ is a catalyst which acts as an accelerator that allows CAs to quickly cure in thick layers by enhancing the alkaline conditions during polymerization. INSTA-SET™ in a spray bottle is normally used to cure the CA that flows from joints when parts are pressed together. Applying an additional bead of thick CA along a seam and then curing it with INSTA-SET™ significantly enhances a joint’s strength. For difficult to bond materials, INSTA-SET™ can be applied to one surface and CA to the opposite surface. When brought together, they will bond instantly. INSTA-SET™ is formulated with a strawberry scent and activates CA in 6 to 8 seconds without any degrading of the CAs strength, which can occur with many other accelerators. It is compatible with all surfaces, even clear plastic and white foam.
$14.00
-
Tamiya Masking Tape for Curves 2mm
Masking is a job which modelers of all kinds of models in every scale must carry out, and it requires precision to ensure that your creation gets the perfect paint job. This masking tape helps in the process, allowing smooth and secure masking-off of curved lines where standard masking tape would sustain creases and possibly let paint seep underneath. This tape is available in 3 separate widths to meet a variety of needs such as 2mm, 3mm and 5mm respectively.• Length of roll: 20m• A soft resin material is used, allowing the tape to adhere in a curved line while preventing paint from seeping into masked off areas.• Use of narrower tape is recommended for sharper curves.
$8.00
-
Tamiya Masking Tape for Curves 3mm
Masking is a job which modelers of all kinds of models in every scale must carry out, and it requires precision to ensure that your creation gets the perfect paint job. This masking tape helps in the process, allowing smooth and secure masking-off of curved lines where standard masking tape would sustain creases and possibly let paint seep underneath. This tape is available in 3 separate widths to meet a variety of needs such as 2mm, 3mm and 5mm respectively.• Length of roll: 20m• A soft resin material is used, allowing the tape to adhere in a curved line while preventing paint from seeping into masked off areas.• Use of narrower tape is recommended for sharper curves.
$11.00$9.00
-
Tamiya Masking Tape for Curves 5mm
Masking is a job which modelers of all kinds of models in every scale must carry out, and it requires precision to ensure that your creation gets the perfect paint job. This masking tape helps in the process, allowing smooth and secure masking-off of curved lines where standard masking tape would sustain creases and possibly let paint seep underneath. This tape is available in 3 separate widths to meet a variety of needs such as 2mm, 3mm and 5mm respectively.• Length of roll: 20m• A soft resin material is used, allowing the tape to adhere in a curved line while preventing paint from seeping into masked off areas.• Use of narrower tape is recommended for sharper curves.
$7.00
-
Scale 75: Putty
Product made from high quality inorganic pigments and pure acrylic resins in combination with aqueous based polyurethane emulsions. Does not contain organic solvents.
$17.00
-
Acrylic Thinner - 60 ml
Renewed solventThe new composition is alcohol-free and non-flammable. It is specially designed to ensure excellent paint fluidity in the airbrush, without negative health and environmental impacts.
$15.00
-
Tamiya Masking Tape 6mm Refill
Tamiya Masking Tape is thin, very strong adhesive tape for modeling use. It even adheres well to uneven surfaces. It's ideal when sharp and crisp lines are required. This tape will not absorb paint color, or leave unsightly marks, making it perfect for use with painted or unpainted scale plastic or radio control models. REFILL TAPE for Item 87030 Masking Tape 6mm w/dispenser
$5.00
-
Tamiya Masking Tape 10mm
Tamiya Masking Tape is thin, very strong adhesive tape for modeling use. It even adheres well to uneven surfaces. It's ideal when sharp and crisp lines are required. This tape will not absorb paint color, or leave unsightly marks, making it perfect for use with painted or unpainted scale plastic or radio control models.
$10.00$6.00
-
Tamiya Masking Tape 18mm Refill
Tamiya Masking Tape is thin, very strong adhesive tape for modeling use. It even adheres well to uneven surfaces. It's ideal when sharp and crisp lines are required. This tape will not absorb paint color, or leave unsightly marks, making it perfect for use with painted or unpainted scale plastic or radio control models. REFILL TAPE for Item 87032 Masking Tape 18mm w/dispenser
$8.00$6.00
-
Tamiya Masking Tape 10mm Refill
Tamiya Masking Tape is thin, very strong adhesive tape for modeling use. It even adheres well to uneven surfaces. It's ideal when sharp and crisp lines are required. This tape will not absorb paint color, or leave unsightly marks, making it perfect for use with painted or unpainted scale plastic or radio control models. REFILL TAPE for Item 87030 Masking Tape 10mm w/dispenser
$4.00
-
Black Friday - Army Painter: Warpaints Effects - Warpaints Mixing Medium
Special EFFECTS Warpaint. Mixing Medium is a transparent resin base designed to thin or dilute your regular Warpaint without changing the flow and viscosity of the Acrylic or Metallic Warpaint. Perfect when building up highlights for blending layers. Add a little at a time untill you're happy with the effect.
$6.00$4.00
-
BSI - Un-Cure Debonder 8 oz
UN-CURE™ debonder will soften cured CA. If parts are bonded incorrectly or your fingers are stuck together, a few drops of UN-CURE™ will dissolve the CA in about a minute. Apply on bonded skin and roll apart fingers. Once stuck, use acetone to clean off softened CA, then wash off with soap and water. Since cured CA is essentially acrylic plastic, anything that will dissolve CA will also soften most plastics. Care must be used, therefore, when using Un-Cure on plastics. Separating plastics parts with a razor saw is usually the best option.
$29.00$22.00
-
Citadel Paint: Air - Air Caste Thinner (24ml)
Formulated to precisely match the colours in the existing Citadel Paint range, these paints are designed for use with your airbrush*.*Please note, this paint range is not suitable for spray guns or hand application.
$12.00$10.00
-
Tamiya Masking Tape for Curves 12mm
Masking is a job which modelers of all kinds in every scale must carry out, and it requires precision to ensure that your creation gets the perfect paint job. This masking tape helps in the process, allowing smooth and secure masking-off of curved lines where standard masking tape would sustain creases and possibly let paint seep underneath. At 12mm it becomes the widest in the Tamiya range, and is great for covering larger areas in one large sweep. This tape is also available in 3 other widths to meet a variety of needs such as 2mm, 3mm and 5mm respectively.• Length of each roll: 20m• A soft resin material is used, allowing the tape to adhere in a curved line while preventing paint from seeping into masked off areas.
$18.00$12.00
-
BSI - Insta-Cure IC-GEL Coral Frag Glue
IC-GEL™ is a cyanoacrylate paste that is extremely thick which comes in an applicator tube like toothpaste. It has the same bonding and curing time characteristics as MAXI-CURE™. IC-GEL™, however, can be applied to a vertical surface and will stay in place. It will not run. This can be very convenient for some assembly applications. Applying CA to the bottom of a horizontal surface, such as a ceiling, can be very difficult with anything other than a full standard CA bottle. IC-GEL™ can be applied at any angle with just a squeeze of the tube. The gel does, however, have a tendency to continue to come out of the tube for about a second after pressure is released, so this must be taken into account to apply the exact amount of IC-GEL™ that you want. IC-GEL™ is an excellent putty for plastic models. It will fill any void and can be formed to many shapes. Applying INSTA-SET™ allows IC-GEL™ to be sanded or filed to final shape in less than 20 seconds. Autobody repairmen have finished their jobs in a fraction of the time by using IC-GEL™ with the additional advantage over normal body putties of superior bonding to metal surfaces.
$9.00
-
Vallejo: 70.792 Liquid Metal - Old Gold
Highly pigmented, light fast and waterproof once dry, and packaged in a spill proof plastic 17ml bottle with eyedropper.Vallejo Game Color and Model Color are special selections of water based acrylic colors for players and collectors of miniatures games. A formula particularly designed for adherence on plastics and metals, using a new resin of unequaled durability and resistance to scrapes and abrasions.
$9.00$8.00
-
Vallejo: 70.790 Liquid Metal - Silver
Highly pigmented, light fast and waterproof once dry, and packaged in a spill proof plastic 17ml bottle with eyedropper.Vallejo Game Color and Model Color are special selections of water based acrylic colors for players and collectors of miniatures games. A formula particularly designed for adherence on plastics and metals, using a new resin of unequaled durability and resistance to scrapes and abrasions.
$10.00$9.00
-
Vallejo: 70.791 Liquid Metal - Gold
Highly pigmented, light fast and waterproof once dry, and packaged in a spill proof plastic 17ml bottle with eyedropper.Vallejo Game Color and Model Color are special selections of water based acrylic colors for players and collectors of miniatures games. A formula particularly designed for adherence on plastics and metals, using a new resin of unequaled durability and resistance to scrapes and abrasions.
$10.00$9.00
-
Avante Art: Soil FX - Odorless Thinner - 120ml
100ML ODORLESS THINNER FOR OIL PAINTS AND ENAMELS
$15.00
You have seen 48 out of 68 products