Paint & Hobby | Basing
AK079 AK Interactive Wet Effects Fluid
Enamel type effect for modellingRain, puddles, streaking water and lots of other similar effects can be done using this excellent product. Use it to add a slight sheen creating the appearance of dampness, moisture, and wetness. This product has the perfect solution, for simulating with great realism for all those effects you can see on any type of vehicle. This is not a shiny varnish, it has been specially designed for these kind effects, offering different intensities to the brightness depending on the surface.
$9.00$8.00
-
AK4062 AK Interactive Light Dust Deposits
Enamel type deposit for modellingThe perfect product to recreate accumulated dust and dirt on your model. This Sand Yellow enamel product is perfectly suitable for vehicles operating in a desert environment or any light soil area. The finish is extremely authentic
$9.00$8.00
-
AK148 Pigment Faded Green
Ultrafine high quality pigment for modelling. The definitive collection of pigments designed exclusively for modelers. A series of basic necessary and frequently used colors mixable between. AK Interactive pigments are much finer than any of the existing products on the market and contain nearly 3 times the quantity of other leading brands at a lower price .These pigments can be applied either dry of wet depending on your taste and the goal you try to achieve. Mix them with Pigment Fixer or White Spirit to apply them wet. When you decide to apply the pigments dry you can later fix them in place with either Pigment Fixer or White spirit.
$9.00$7.00
-
AK022 AK Interactive Africa Dust Effects
Enamel type product for modelling.Realist color to make dust effects in vehicles of the Africa Korps, British or even modern. Light tan color is suited to creating dusty accumulations on surfaces. Apply with a brush or airbrush and then fade with a clean brush moist with Enamel Thinner.
$9.00$8.00
-
AK016 AK Interactive Fresh Mud Effects
Enamel type product for modelling.A product to replicate natural fresh mud. This Dark brown enamel effect is ideally suited for creating muddy surfaces. It can be also mix with plaster to create volume. Apply with a brush or airbrush and then fade with a clean brush moist with Enamel Thinner. Just apply to your vehicle wheels, tracks and hull to achieve the most realistic effect.
$9.00$8.00
-
AK140 Pigment Sienna Soil
Ultrafine high quality pigment for modelling. The definitive collection of pigments designed exclusively for modelers. A series of basic necessary and frequently used colors mixable between. AK Interactive pigments are much finer than any of the existing products on the market and contain nearly 3 times the quantity of other leading brands at a lower price .These pigments can be applied either dry of wet depending on your taste and the goal you try to achieve. Mix them with Pigment Fixer or White Spirit to apply them wet. When you decide to apply the pigments dry you can later fix them in place with either Pigment Fixer or White spirit.
$9.00$7.00
-
AK4063 AK Interactive Brown Earth Deposits
Enamel type deposit for modellingThe perfect product to recreate accumulated dust and dirt on your model. This Sand Yellow enamel product is perfectly suitable for vehicles operating in a desert environment or any light soil area. The finish is extremely authentic
$9.00$8.00
-
AK023 AK Interactive Dark Mud
Enamel type product for modelling.This dark earth colored effect can be used alone or mixed with other earth tones. Apply and fade with a clean brush moist with Enamel Thinner. Make your own dark mud and earth accumulations mixing this color with plaster. The result is ultra-realist and is easy to get all kinds of effects. Also it can be applied directly on tracks, wheels or vehicle hulls. This product is enamel and it can be blended with the rest of our colors and it is diluted with our White Spirit.
$9.00$8.00
-
AK159 AK Interactive Metal Burnishing
A new faster formula (works in seconds), and at a more competitive price. We have extensively tested and formulated, and improved this product, here at AK-Interactive. With our Metal Burnishing fluid, you can naturally weather and rust white metal tracks, such as those made by Friulmodel or ours. Just dip the tracks in the liquid for a few seconds and the metal will begin to appear dark and rusty very quickly, easily and effortlessly. You can vary the effect using different dilutions and varying lengths of soak. Using less product, you can achieve even better results than with our previous formula.
$16.00$14.00
-
AK1223 Emerald Sphere – Wargame Terrains – 100ML
This cool green texture will make your miniatures stand out on an original surface made up of emeralds and shiny stones. Depending on the position of the light, the brightness of the minerals can be observed.
$16.00$14.00
-
AK677 AK Interactive Wash: Neutral Grey
Enamel type wash for modellingA basic wash that is useful for many colors, ranging from metallic to reds, yellows, blues etc. A must have for vehicles, figures and sci-fi lovers.The basic technique used to weather any type of model is the wash, a classic technique that is still one of the most used techniques in modelling today. Apply the washes after shaking the bottle with a large brush to pick out details and creating shadows. The excess of the wash can be easily removed with a clean brush and White Spirit.
$9.00$8.00
-
AK080 AK Interactive Summer Kursk Earth
Enamel type PRODUCT for modelling.Medium yellow-brown colored effect ideally suited for creating dust and dirt appearance. Apply with a brush or airbrush and then fade with a clean brush moist with Enamel Thinner. A very special and different color for vehicles in arid or dry terrain, like the areas around Kursk, however it can also be used for other war scenes. A unique color to compliment your collection of earth and dust colors.
$9.00$8.00
-
AK4061 AK Interactive Sand Yellow Deposits
Enamel type deposit for modellingThe perfect product to recreate accumulated dust and dirt on your model. This Sand Yellow enamel product is perfectly suitable for vehicles operating in a desert environment or any light soil area. The finish is extremely authentic
$9.00$8.00
-
AK-Interactive: DUAL EXO Acrylic Paint - NCC Grey 18B (60ml)
Dual Exo is a professional paint technologically developed from an ultra-resistant acrylic polymer with maximum covering power and resistance.It is a self-leveling acrylic paint that provides a slightly satin finish. What makes this range special is that it is made from a dispersion (resin) of a very fine aqueous copolymer with a specific morphology that makes it multi-adherent.Get a scaled effect of the paint on your models with the color mixtures. The DUAL painting system is designed to make transitions of vivid colors on Mechas, Gunpla, Sci-Fi, etc. but above all it is designed to do it in a simple, effective and fast way.This painting system is identified by a Number and a Letter on each painting (1A-1B, 2A-2B, 3A-3B, etc.) and allows to darkening of color A with color B or lightening color B with color A, depending on the base color. By modifying the proportions we will obtain intermediate shades of color to make the transitions in a simple way without thinking about which color to use so that the shades work harmoniously.Features:* Acrylic paint. Non-toxic. Odorless. Does not damage the plastic.* Ultra-resistant with maximum adhesion on any surface.* Stretches and does not leave orange peel.* Self-leveling.* It can be applied both with airbrush and brush but given its lowviscosity is ideal for use with an airbrush.* Technically perfect paint.* Slightly satin finish.
$8.00$6.00
-
Black Friday - AK665 Texturizer Acrylic Resin
Ultrafine high quality pigment for modelling. The definitive collection of pigments designed exclusively for modelers. A series of basic necessary and frequently used colors mixable between. AK Interactive pigments are much finer than any of the existing products on the market and contain nearly 3 times the quantity of other leading brands at a lower price .These pigments can be applied either dry of wet depending on your taste and the goal you try to achieve. Mix them with Pigment Fixer or White Spirit to apply them wet. When you decide to apply the pigments dry you can later fix them in place with either Pigment Fixer or White spirit.
$13.00$8.00
-
AK2074 AK Interactive Paneliner for White and Winter Camouflage
Enamel type effect for modellingA new high quality enamel product, developed for scale aircraft models, with an improved flow for easy creation of depth, and emphasis of surface detail. Forget complex mixes or infinity of colors. This product is perfectly suitable for aircraft models which are painted in a white color, or carrying winter camouflage schemes.
$9.00$8.00
-
Black Friday - AK2032 AK Interactive Wash: For Shafts and Bearings
Enamel type effect for modellingMake real grease effects in any type of pieces. With this product you can manipulate the grease effect until dry to get real appearance in different parts of your planes or in any vehicle with a very special texture. You can make small scratches with a stick before completely dry and achieve a real effect. This product is enamel and it can be blended with the rest of our colors and it is diluted with our White Spirit.
$9.00$6.00
-
AK304 AK Interactive Brown Streaking Grime for Red Hulls (Naval)
Enamel type streaking for modelling.With this enamel product the modeler may easily represent streaking dirt effects on ship hulls painted in red primer. It can also be used on other issues such as the hull of a tank. Shake well before use. Apply your streak with a fine pointed brush in irregular vertical lines from upper parts on sides and let the paint dry for about 10 minutes. Next take a flat brush moistened in White Spirit and swipe with little pressure over the earlier applied streak to soften the effect and create a natural look.
$9.00$8.00
-
AK066 AK Interactive Wash: For Afrika Korps Vehicles
Enamel type wash for modellingD.A.K. wash for Africa Corps vehicles, also other light colored desert vehicles. Apply on details and remove excess with a clean brush moist with Enamel Thinner.A very appropriate color for desert vehicles painted with a light sand color, especially German tanks from DAK.The basic technique used to weather any type of model is the wash, a classic technique that is still one of the most used techniques in modelling today. Apply the washes after shaking the bottle with a large brush to pick out details and creating shadows. The excess of the wash can be easily removed with a clean brush and White Spirit.
$9.00$8.00
-
Black Friday - AK302 AK Interactive Wash: For Grey Decks (Naval)
Enamel type wash for modelling.This enamel wash is specially designed to bring out the details in gray warships typical of many nationalities from the Kriegsmarine, United States Navy, or Imperial Japanese Navy. Also it can be used in other subjects such as aircraft or gray tanks.The basic technique used to weather any type of model is the wash, a classic technique that is still one of the most used techniques in modelling today. Apply the washes after shaking the bottle with a large brush to pick out details and creating shadows. The excess of the wash can be easily removed with a clean brush and White Spirit.
$9.00$6.00
-
AK300 AK Interactive Wash: For Dark Yellow
Enamel type wash for modellingA wash specially designed for German Dark Yellow (Dunkelgelb), but also great for vehicles in medium tones. Just shake well before use and you can apply it directly to your model to create contrast and depth in the details. Remove excess with a clean brush moist in Enamel Thinner. This is an enamel product and can by dissolved using our White Spirit or Odourless Turpentine.The basic technique used to weather any type of model is the wash, a classic technique that is still one of the most used techniques in modelling today.
$9.00$8.00
-
Black Friday - AK261 AK Interactive Filter: Ocher for Sand
Enamel type FILTER for modelling.Filters are designed to achieve a subtle tonal variation for especially vehicles in monotone camouflage colors. Shake and apply directly from the bottle with a moist flat brush. This ocher filter allows us to change subtly the base tone of woods or light browns making it more accurate and authentic color. At the same time, the filter adds depth and richness to our vehicle, preparing it for the next paint steps. Use the filters by moistening a brush and applying it without flooding the surface, to enrich hues in your models, unify camouflage, or highlight areas with a different tone. With these products we will avoid mixing paints, looking for the correct dilution, or searching for the correct colors for our vehicle. These filters are enamel based and can be cleaned or diluted with Odorless Enamel Thinner.
$9.00$6.00
-
Black Friday - AK075 AK Interactive Wash: For Nato Vehicles
Enamel type streaking for modelling.A unique Streaking Grime effect specifically designed for vehicles painted in a tri-color camouflage scheme like those used by NATO but can be used in any vehicle. Create realistic streaks and rainmarks with this light colored enamel effect. Shake well before use. Apply your streak with a fine pointed brush in irregular vertical lines from lower parts on sides and let the paint dry for about 10 minutes. Next take a flat brush moisted in White Spirit and swipe with little pressure over the earlier applied streak to soften the effect and create a natural look.
$9.00$6.00
-
Black Friday - AK305 AK Interactive Streaking Grime for Light Grey Ships (Naval)
Enamel type streaking for modelling.With this enamel product the modeler may easily represent streaking dirt effects on ships painted in light grey. It can also be used on other issues of similar color such as aircraft or AFVs. Shake well before use.Apply your streak with a fine pointed brush in irregular vertical lines from upper parts on sides and let the paint dry for about 10 minutes. Next take a flat brush moistened in White Spirit and swipe with little pressure over the earlier applied streak to soften the effect and create a natural look.
$9.00$6.00
-
Black Friday - AK071 AK Interactive Filter: Blue for Panzer Grey
Enamel type FILTER for modelling.Filters are designed to achieve a subtle tonal variation for especially vehicles in monotone camouflage colors. Shake and apply directly from the bottle with a moist flat brush. . This filter allows us to change subtly the base tone of our vehicles in grey or panzer grey making it more accurate and authentic color. At the same time, the filter adds depth and richness to our vehicle, preparing it for the next paint steps. Use the filters by moistening a brush and applying it without flooding the surface, to enrich hues in your models, unify camouflage, or highlight areas with a different tone. With these products we will avoid mixing paints, looking for the correct dilution, or searching for the correct colors for our vehicle. These filters are enamel based and can be cleaned or diluted with Odorless Enamel Thinner.
$9.00$6.00
-
AK-Interactive: DUAL EXO Acrylic Paint - Solar Yellow 2A (60ml)
Dual Exo is a professional paint technologically developed from an ultra-resistant acrylic polymer with maximum covering power and resistance.It is a self-leveling acrylic paint that provides a slightly satin finish. What makes this range special is that it is made from a dispersion (resin) of a very fine aqueous copolymer with a specific morphology that makes it multi-adherent.Get a scaled effect of the paint on your models with the color mixtures. The DUAL painting system is designed to make transitions of vivid colors on Mechas, Gunpla, Sci-Fi, etc. but above all it is designed to do it in a simple, effective and fast way.This painting system is identified by a Number and a Letter on each painting (1A-1B, 2A-2B, 3A-3B, etc.) and allows to darkening of color A with color B or lightening color B with color A, depending on the base color. By modifying the proportions we will obtain intermediate shades of color to make the transitions in a simple way without thinking about which color to use so that the shades work harmoniously.Features:* Acrylic paint. Non-toxic. Odorless. Does not damage the plastic.* Ultra-resistant with maximum adhesion on any surface.* Stretches and does not leave orange peel.* Self-leveling.* It can be applied both with airbrush and brush but given its lowviscosity is ideal for use with an airbrush.* Technically perfect paint.* Slightly satin finish.
$8.00$6.00
-
AK306 AK Interactive Salt Streaks for Ships (Naval)
Enamel type streaking for modelling.With this enamel product the modeler may easily represent streaking effects left by salt on vertical surfaces or horizontal areas of any ship. Shake well before use. Apply your streak with a fine pointed brush in irregular vertical lines from upper parts on sides and let the paint dry for about 10 minutes. Next take a flat brush moisted in White Spirit and swipe with little pressure over the earlier applied streak to soften the effect and create a natural look.
$9.00$8.00
-
Black Friday - AK078 AK Interactive: Damp Earth
Enamel type product for modelling.This color is perfet for southern Europe areas, although it can be used for other places around the world. When its dry this product has a satin effect which helps represent the aspect of wet or damp earth. It can be applied using washes over your model or mixed with plaster to give volume to mud effects.Shake well before use and use in parts desired of your model. Afterwards, blend using a wide flat brush dampened with AK Interactive White Spirit.
$9.00$6.00
-
AK2033 AK Interactive Wash: Aircraft Engine
Enamel type effect for modellingThe perfect wash for aircraft engines. You can highlight details easily with this color. Just shake well before use and you can apply it directly to your model to create depth in the details. This is a enamel product and can by dissolved using our white spirit or ODOURLESS TURPENTINE. We recommend that this product is applied to surfaces that have been painted or varnished with acrylic paint.
$9.00$8.00
-
AK2029 AK Interactive Wash: Landing Gear
Enamel type effect for modellingThe perfect wash for landing gear parts. Indicated for darkest shades of metallic surfaces such as jet engines and hydraulic suspensions of WWII or modern aircraft .Just shake well before use and you can apply it directly to your model to create depth in the details. This is a enamel product and can by dissolved using our white spirit or ODOURLESS TURPENTINE. We recommend that this product is applied to surfaces that have been painted or varnished with acrylic paint.
$9.00$8.00
-
AK301 AK Interactive Wash: Dark for Wood Decks (Naval)
Enamel type wash for modelling.This enamel wash is specially designed to bring out the detail of the wooden covers typical of many warships. It can also be easily used for any other wooden subject.Just shake well before use and you can apply it directly to your model to create contrast and depth in the details. Remove excess with a clean brush moist in Enamel Thinner. This is an enamel product and can by dissolved using our White Spirit or Odourless Turpentine.The basic technique used to weather any type of model is the wash, a classic technique that is still one of the most used techniques in modelling today.
$9.00$8.00
-
AK121 AK Interactive Streaking Wash: OIF & OEF - US Vehicles
Enamel type wash for modellingThe perfect color for a wash in modern US vehicles OIF and OEF. This Dirt color wash has been specifically suited for use over Modern US sand colored vehicles.The basic technique used to weather any type of model is the wash, a classic technique that is still one of the most used techniques in modelling today. Apply the washes after shaking the bottle with a large brush to pick out details and creating shadows. The excess of the wash can be easily removed with a clean brush and White Spirit.
$9.00$8.00
-
Black Friday - AK076 AK Interactive Filter: Dark Brown for Nato and Green
Enamel type FILTER for modelling.Filters are designed to achieve a subtle tonal variation for especially vehicles in monotone camouflage colors. Shake and apply directly from the bottle with a moist flat brush. This brown filter allows us to change subtly the base tone of our vehicles in nato camos or green colors making it more accurate and authentic color. At the same time, the filter adds depth and richness to our vehicle or accessory, preparing it for the next paint steps. Use the filters by moistening a brush and applying it without flooding the surface, to enrich hues in your models, unify camouflage, or highlight areas with a different tone. With these products we will avoid mixing paints, looking for the correct dilution, or searching for the correct colors for our vehicle. These filters are enamel based and can be cleaned or diluted with Odorless Enamel Thinner.
$9.00$6.00
-
Black Friday - AK074 AK Interactive Rainmarks for NATO vehicles
Enamel type streaking for modelling.A unique Streaking Grime effect specifically designed for vehicles painted in a tri-color camouflage scheme like those used by NATO but can be used in any vehicle. Create realistic streaks and rainmarks with this light colored enamel effect. Shake well before use. Apply your streak with a fine pointed brush in irregular vertical lines from lower parts on sides and let the paint dry for about 10 minutes. Next take a flat brush moisted in White Spirit and swipe with little pressure over the earlier applied streak to soften the effect and create a natural look.
$9.00$6.00
-
AK2019 AK Interactive Aircraft Engine Oil
Enamel type effect for modellingThe definitive mixture to make oil effects in any type of airplane parts. The oil in planes is different than in other vehicles as the color is lighter. This product is enamel and it can be blended with the rest of our colors and it is diluted with our White Spirit.
$9.00$8.00
-
Black Friday - AK123 AK Interactive OIF & OEF - US Vehicles Streaking Effects
Enamel type streaking for modelling.Ideal color for creating dirt steaks on sand and light brown colored vehicles. Also suitable for other effects such as add chromatic richness to any piece or surface. These days, the streaking dirt effect is one of the many effects that we can find on nearly all of the American vehicles. This dirt is a very specific color characteristic when it is seen over the American sand color FS 33446. This color will make the work easier and you can achieve an extremely realistic finish to your model. Just shake well and it is ready to use. Apply lines from the upper part of plate and then fade with a clean brush moist with Enamel Thinner.
$9.00$6.00
-
Black Friday - AK093 AK Interactive Wash: Interior
Enamel type wash for modellingThis product allow us bring life to the details of the interior of our tanks. This wash is specially designed to be applied over the light colors of the interiors, such as RAL 9001 Cremeweiss or white. For this reason we can also use it on winter camouflaged vehicles. Ideal wash for creating the accumulation of dirt and grime on details on light colors.The basic technique used to weather any type of model is the wash, a classic technique that is still one of the most used techniques in modelling today. Apply the washes after shaking the bottle with a large brush to pick out details and creating shadows. The excess of the wash can be easily removed with a clean brush and White Spirit.
$9.00$6.00
-
AK174 AK Interactive Brass Phototech Burnishing
New formula, improved, faster and at a more competitive price. This liquid will darken the photo etch brass parts, and also barrels of machine guns and tank barrels. The end result with brass parts is a finish which is very similar to steel. It is highly recommended to darken your photo-etch parts before use.
$16.00$14.00
-
Black Friday - AK4162 AK Interactive Filter: Blue Green for Green Camo
Enamel type filter for modellingFilters are designed to achieve a subtle tonal variation for especially vehicles in monotone camouflage colors. Shake and apply directly from the bottle with a moist flat brush.This grey filter allows us to change subtly the base tone of white winter surfaces such as tanks, spaceships, light colored aircraft, or vehicles of the United Nations. Making it more accurate and authentic color. At the same time, the filter adds depth and richness to our vehicle or accessory, preparing it for the next paint steps. Use the filters by moistening a brush and applying it without flooding the surface, to enrich hues in your models, unify camouflage, or highlight areas with a different tone. With these products we will avoid mixing paints, looking for the correct dilution, or searching for the correct colors for our vehicle. These filters are enamel based and can be cleaned or diluted with Odorless Enamel Thinner.
$9.00$6.00
-
Black Friday - AK303 AK Interactive Wash: Grey for Kriegsmarine Ships (Naval)
Enamel type wash for modelling.This enamel wash is specially designed to bring out the details inthe colors of scale ships of Kriegsmarine. Also it can be used in other subjects such as aircraft or AFVs with a grey finish.The basic technique used to weather any type of model is the wash, a classic technique that is still one of the most used techniques in modelling today. Apply the washes after shaking the bottle with a large brush to pick out details and creating shadows. The excess of the wash can be easily removed with a clean brush and White Spirit.
$9.00$6.00
-
AK2031 AK Interactive Landing Gear Dust
Enamel type effect for modellingThis is an enamel product to recreate natural dust effects on landing gear and tires. Simply apply it to your aircraft wheels or landing gear to achieve the most realistic effect possible. After, you just blend with a clean brush moist with Enamel Thinner to produce some great realistic streaking grime effects.
$9.00$8.00
-
Black Friday - AK262 AK Interactive Filter: Red Brown for Wood
Enamel type product for modelling.Filters are designed to achieve a subtle tonal variation for especially vehicles in monotone camouflage colors. Shake and apply directly from the bottle with a moist flat brush. This dark brown filter allows us to change subtly the base tone of woods or light browns making it more accurate and authentic color. At the same time, the filter adds depth and richness to our vehicle or accessory, preparing it for the next paint steps. Use the filters by moistening a brush and applying it without flooding the surface, to enrich hues in your models, unify camouflage, or highlight areas with a different tone. With these products we will avoid mixing paints, looking for the correct dilution, or searching for the correct colors for our vehicle. These filters are enamel based and can be cleaned or diluted with Odorless Enamel Thinner.
$9.00$6.00
-
AK065 AK Interactive Filter: Light Brown For Desert Yellow
Enamel type FILTER for modelling.Filters are designed to achieve a subtle tonal variation for especially vehicles in monotone camouflage colors. Shake and apply directly from the bottle with a moist flat brush. This filter allows us to change subtly the tone of base color of our vehicles in light sand or desert tones making it more accurate and authentic color. At the same time, the filter adds depth and richness to our vehicle, preparing it for the next paint steps. Use the filters by moistening a brush and applying it without flooding the surface, to enrich hues in your models, unify camouflage, or highlight areas with a different tone. With these products we will avoid mixing paints, looking for the correct dilution, or searching for the correct colors for our vehicle. These filters are enamel based and can be cleaned or diluted with Odorless Enamel Thinner.
$9.00$8.00
-
AK4161 AK Interactive Filter: Neutral Grey
Enamel type filter for modellingFilters are designed to achieve a subtle tonal variation for especially vehicles in monotone camouflage colors. Shake and apply directly from the bottle with a moist flat brush.This grey filter allows us to change subtly the base tone of white winter surfaces such as tanks, spaceships, light colored aircraft, or vehicles of the United Nations. Making it more accurate and authentic color. At the same time, the filter adds depth and richness to our vehicle or accessory, preparing it for the next paint steps. Use the filters by moistening a brush and applying it without flooding the surface, to enrich hues in your models, unify camouflage, or highlight areas with a different tone. With these products we will avoid mixing paints, looking for the correct dilution, or searching for the correct colors for our vehicle. These filters are enamel based and can be cleaned or diluted with Odorless Enamel Thinner.
$9.00$8.00
-
AK046 AK Interactive Wash: Light Rust
Enamel type wash for modelling.Light rust wash is indicated for rust effects on all kind of surfaces. Perfect for any rust effects on vehicles or accessories. It has a light rusty color, which stands out really well on dark greens giving a great realistic matt finish. It is perfect for amphibious or normal vehicles in wet environments. Also great for doing rusting effects on abandoned vehicles.The basic technique used to weather any type of model is the wash, a classic technique that is still one of the most used techniques in modelling today. Apply the washes after shaking the bottle with a large brush to pick out details and creating shadows. The excess of the wash can be easily removed with a clean brush and White Spirit.
$9.00$8.00
-
AK013 AK Interactive Rust Streaks
Enamel type streaking for modelling.Rust and corrosion streaks and stains are easily produced using this reddish-brown color.Shake well before use. Apply your streak with a fine pointed brush in irregular vertical lines from upper parts on sides and let the paint dry for about 10 minutes. Next take a flat brush moisted in White Spirit and swipe with little pressure over the earlier applied streak to soften the effect and create a natural look.
$9.00$8.00
-
AK014 AK Interactive Winter Streaking Grime
Enamel type streaking for modelling.Light grey color ideal for creating dirt streaks on light or white colored surfaces. Also suitable for other effects such as add chromatic richness to any piece or surface. Shake well before use. Apply your streak with a fine pointed brush in irregular vertical lines from upper parts on sides and let the paint dry for about 10 minutes. Next take a flat brush moisted in White Spirit and swipe with little pressure over the earlier applied streak to soften the effect and create a natural look.
$9.00$8.00
-
AK024 AK Interactive Dark Streaking Grime
Enamel type streaking for modelling.Darkest color in our range specifically suited for streaking effects over dark colored vehicles and surfaces. Also suitable for other effects such as add chromatic richness to any piece or surface.Shake well before use. Apply your streak with a fine pointed brush in irregular vertical lines from upper parts on sides and let the paint dry for about 10 minutes. Next take a flat brush moisted in White Spirit and swipe with little pressure over the earlier applied streak to soften the effect and create a natural look.
$9.00$8.00
You have seen 48 out of 133 products