Paint & Hobby | Tools
Gamers Guild / Plato Fine Detail Model Cutters
Metal Flush Cutting Tool perfect for your miniature and hobby needs. Clippers, Hobby Snippers, Pliers. 170.
$19.99$7.99
-
Citadel: Tools - Water Pot
The water pot is 100mm wide at its base, and 90mm tall.
$11.25$9.56
-
Army Painter: Tools - Hobby Knife
The Hobby Knife is essentially a surgical scalpel made for miniatures. Razor sharp and very precise, it is a fundamental tool for all wargamers.Includes 5 extra blades.
$7.92
-
Army Painter: Tools - Hydro Pack
The perfect top up pack for The Army Painter Wet Palette. This Hydro Pack contains 50x pieces of Hydro sheets and 2x pieces of air-tight Hydro foams.Note: The Hydro Pack is a refill set for the Wet Palette. Complete refill package – In this Hydro Pack you get a complete set of 50 Hydro Palette Paper Sheets and 2 Hydro Wet Palette Sponges Keep your paints fresh and ready – Whether you tend to use paints straight out of the bottle, or you mix a lot, our wet palette for acrylic painting will keep your acrylic Warpaints wet and fresh Hydro sheet membranes for perfect moisture level – Our Hydro Sheets for acrylic palette are designed specifically for allowing the ideal amount of water to seep into our acrylic Warpaints
$8.37
-
Army Painter: Tools - Sculpting Tools
These sculpting tools, when used in conjunction with Green Stuff, offer the modeling hobbyist a range of different shapes for any sculpting project.Keep away from children.
$11.99$8.82
-
Citadel: Tools - Tape Measure
A tape measure, extends to 10ft/120", is marked in both centimeters and inches, features an auto-locking blade.
$10.00$8.50
-
Pro Acryl: Tools - Mini Agitators
5mm glass agitators, made from laboratory grade glass! Green, mean, agitating machines. Our balls are squeaky clean, contaminate free, and totally non threatening. Completely inert, so no risk of rust or damage to your paints. Sold in packs of 50. *We recommend adding 2 balls to each of your paints for best results.
$2.50$2.25
-
Army Painter: Tools - Precision Side Cutter
The Metal Side Cutter is for wargaming metal miniatures and larger bits of resin. Made from stainless steel and with safety grip handle, it is a lot more durable than the Plastic Side Cutter although less precise. Using the wargaming metal side cutter: - For cutting arms, legs, weapons, and for cleaning metal miniatures. - If cutting a larger piece of metal, make many smaller cuts, rather than one large. - Only use for "white metal" used for miniatures and avoid steel and piano wire. - Always use safety goggles.
$12.99$10.42
-
Scale 75 Multi Well Paint Palette
Perfect for mixing and dropping paint in for all hobby needs.
$2.75
-
Army Painter: Tools - Markerlight Laser Pointer
The TRUE LINE OF SIGHT can be very hard to establish and can lead to discussions at the gaming table. Well, no more. The compact Markerlight Laser Pointer will show you exactly what your models can see - no matter the terrain or battlefield - making it an absolute invaluable tool for Wargaming. Three batteries are included.Warning: Do not look directly at laser lights.
$7.67
-
Army Painter: Tools - Self-Healing Cutting Mat
The Army Painter Self-Healing Cutting Mat not only protects the surface of your work area but also protects your knife and scalpel blades against dulling. This cutting mate is very easy to use. Simply place it at your preferred work area. Place the object you need to cut on the mat and cut with a motion aiming towards the mat. The mat is easy to clean using a damp cloth and continues to provide a level, even surface even after hundreds of cuts.
$9.99$8.21
-
Army Painter: Tools - Tweezers Set
Tweezers are a very useful tool for assembling miniatures and handling small components, especially for gluing, converting, or handling decals.
$9.99$7.47
-
Pro Acryl: Tools - Mold Line / Seam Scraper
The monumenTOOLS line provides hobbyists with great quality, purpose-driven tools to make building, prepping, and finishing models that much easier. The Mold Line / Seam Scraper gives you a high quality, stainless steel blade for taking down unwanted seams along the perimeter of your model and mold imperfections. It provides two blades, each with an opposing angle to get into tight spots from any direction. The curve of the blades allows for minimal surface contact, so that you don't have unwanted tool marks on the surface of the model. Simply scrape the blade along the surface and watch those seams disappear. Great for resin, plastic, and even metal models.
$9.47
-
Citadel: Tools - Palette Pad
The Citadel Palette Pad contains 20 disposable painting palettes. The plastic paper pages that form each palette are bound together on one edge. Once you have finished using a palette simply tear it out of the pad and pop it in the bin. No more washing!
$12.25$10.41
-
Army Painter: Tools - Drill Bits
This premium set gives you 10 drill bits in 8 different sizes.Contents:0.7mm Bit x20.9mm Bit x21.0mm Bit x11.2mm Bit x11.5mm Bit x12.0mm Bit x12.5mm Bit x13.0mm Bit x1
$10.99$8.37
-
Army Painter: Tools - Paint Mixing Bottles
MIXING PAINTS CAN BE FUN We believe that the 124 different paints in the color palette of The Army Painter are enough to complete even the most complex miniature painting project. But we know that customizing your models may be very important to you and you may want to create your own colors. That's why we designed The Army Painter set of small squeeze bottles to support your creativity. HELPING YOU TO PREVENT PAINT DRYING AND WASTAGE The Army Painter squirt bottles are designed with a special bottle cap system, enabling you to administer the exact amount of paint you need. While you are painting the lid remains closed preventing wastage and drying out the paint. HIGH QUALITY, AFFORDABLE With this paint mixing plastic bottle set, you don’t need to choose between price and quality because you have them both. Our 12ml mini bottles hold exactly the volume of paint you need for model painting. They are made of high-quality, clear, low-density polyethylene to be plastic enough for squeezing. Durable and reusable bottles with fine point tips and leak-proof screw-on lids. What could be more comfortable and safe? RESPECTING YOUR CREATIVITY The cut-out labels on the bottles will let you see your new custom paint color. And you also have space on the label to write notes so that you could repeat the mixing task when you need more paint HOW TO MIX PAINTS 1. Remove the dropper to fill in the paint. 2. Pour the paints you want to blend into the mixing paint bottle and give it a shake. You may want to use our mixing balls (sold separately). 3. Take notes on the mixed colors directly on the label of the dispenser bottle
$4.87
-
Citadel: Tools - 2022 Mouldline Remover
This version of the Mouldline Remover includes a number of improved features: – Longer and thinner nose, roughly half the size of the previous version, reaches every nook and cranny while increasing visibility and precision– Ergonomic handle is tapered in the front, allowing you to change to a pencil-like control grip for fine work, with a chunky base to allow greater comfort and reduce hand fatigue during normal use– Notched back designed to clean up the tapered edges of your bases, making it quick and easy to get a paint-ready finish
$26.00$22.10
-
Army Painter: Sets - Hobby Tool Kit
These diamond files are extremely versatile tools for the wargamer & hobbyist. A must-have for custom conversions and cleaning mold lines, as well as preparing pieces for gluing.Keep away from children.
$24.92
-
Army Painter: Tools - Miniature & Model Files
These 3x diamond files are extremely versatile tools for the wargamer & hobbyist. A must-have for custom conversions and cleaning mold lines, as well as preparing pieces for gluing. Works on plastic, resin and metal surfaces. Works on plastic, resin and metal surfaces. High-quality diamond files. Durable and easy to use.
$6.97
-
Scale 75 Big Stix
Big Stix are designed for the finishing touch. These are high grit range sanders designed to polish off your model to the perfect smoothness and provide that professional finish. Good for all types of models and projects.
$5.99$5.09
-
Citadel: Tools - Assembly Stand
This wide, stable base features a snug holder to keep a Painting Handle or Painting Handle XL secure and safe while you work. You'll also find two flexible yet sturdy assembly arms with rubberised jaws to hold components in place while the glue cures, making assembly easier than ever. Several shallow trays along the base allow you to collect the various bits and bobs that tend to pile up as you work.This assembly base is compatible with the newer, ergonomic design of the Citadel Colour Painting Handle, and the older decagonal handle will not fit in the central holder.
$28.00$23.80
-
Citadel: Tools - 2022 Drill
This hobby drill was redesigned to make it easier and safer to use by incorporating a number of design features: – Designed primarily in a light-weight hard plastic to reduce hand fatigue– Ergonomic shape incorporating ridges and grooves increases control and allows you to safely exert pressure– Bit-securing barrel is recessed into the handle, so it won’t unscrew during use– Freely rotating end cap allowing you to push down gently and rotate at the same time– Includes four bits in two sizes, perfect for a wide variety of Citadel model kits, stored in their own container when not in use
$35.00$29.75
-
2 in 1 Wet Palette and Palette Scale 75
Double palette consisting on a classic palette with small and large wells and a wet palette.This set is completed with a wet palette pack the includes 50 sheets of paper and absorbent material.
$65.92
-
Citadel: Tools - 2022 Super Fine Detail Cutters
This new set of Super Fine Detail Cutters includes a number of improved features: – Ultra thin blades (about three times smaller than the previous model) allow you to get into tight spaces with ease, increasing visibility and control– Blades meet perfectly flush on the back, reducing the amount of additional cleanup needed and reducing the risk of pieces pinging away when used properly– Bump-stopping design makes it impossible to mash the blades together with too much pressure, which means they’ll stay sharp for longer– Rubberised contoured handles, including flares near the blades for added control, precision, and safety.– Extended handles to reduce the pressure required to make a cut, reducing hand fatigue
$52.00$44.20
-
Gamers Guild AZ: Measuring Tape - 10m x 25mm
Blue and black measuring table. 10mx25mm. Replace your old tape measure and rep your store!
$7.50
-
Citadel: Tools - File Set
Files are used to remove the small imperfections that may be created when you cut the model from it’s frame. This set contains two files; one rough and one fine. Both are half round in shape and feature a fine point, enabling you to file down and polish your miniature to a perfect finish.
$23.00$19.55
-
Citadel: Tools - 2022 Knife
This knife features a fully sculpted hard plastic handle, and incorporates a number of clever features for safety and convenience: – Fixed single slot blade barrel, ensuring perfect alignment– Ribbed shroud behind the blade, allowing safer downward pressure and maximum precision– Ergonomic handle to reduce hand fatigue, and prevent rolling on your desk– Back-weighted design, so it’s less likely to fall with the blade down– Blade changing thread recessed into the handle so the blade doesn’t loosen during use– Blade capThe Citadel Tools Knife also comes with a pack of six replacement blades in a container.
$35.00$29.75
-
$44.99$44.82
-
Pro Acryl: Tools - Retractable Hobby Cutter
Now with super, awesome, wow, black button! One knife to rule them all! Our retractable hobby cutter is the perfect combination of utility and safety. The retractable blade is contained in a metal-framed skeleton, with a plastic housing for durability, and the flat shape of the handle guarantees the knife won't roll off your work surface and land in places you wish it wouldn't! Great for cutting sprue, plastic, resin and light metals. 1 easy-to-replace blade included - additional blades available in x5 packs!
$11.25$10.13
-
Warhammer: 12mm Dice Cube (Black)
Contents:1 Dice Cube (Black)
$12.50$10.63
-
Citadel: Case - Crusade Figure Case
The Citadel Figure Cases are the perfect way to transport and protect your Citadel miniatures. Containing one set of our revolutionary channel foam, the Citadel Crusade Figure Case has been specially designed to fit almost any model that we make, any shape and size, quickly and easily without the chore of cutting and shaping to fit.Packing and unpacking the case is absurdly quick and easy; any model, however pointy, placed anywhere within the channels will be protected as well as if you’d spent countless hours hacking away at a custom fit. You’ll free up more time to concentrate on games, painting or just showing off your miniatures collection. The channel foam is as efficient a use of space as possible, allowing you to store more models more safely than any other case. Have a look at the images or check out the video in the tab to the right to to get a taste for just how life-changingly excellent these cases are - you won’t be able to work out how you lived without them. It’s ok. Those dark times are over now.We know that you want the best protection for your miniatures - the foam inside the case is slightly larger than the case itself, and will compress around the figures when closed, ensuring a minimum of movement for any miniature.. It also has nylon catches, so if you should drop it the catches won’t break. To ensure the robustness of the stress points, a metal hinge runs along the back, strengthening and adding a reassuring weightiness.We’ve put a lot of effort and research into making the case as comfortable as possible to transport, with ergonomically-designed handles for maximum grip - and the lid locks open, meaning no terrible accidents crushing your beloved miniatures on the gaming table. The Citadel Crusade Figure Case also comes with a padded shoulder strap, making it even easier to transport. -Games Workshop
$194.00$164.90
-
Warhammer: 12mm Dice Cube (Red)
Contents:1 Dice Cube (Red)
$12.50$10.63
-
Warhammer: 12mm Dice Cube (Green)
Contents:1 Dice Cube (Green)
$12.50$10.63
-
GodHand: SPN-120 Ultimate Nipper 5.0
This product is intended for use with soft plastics, such as Bandai Model Kits. Please use with extreme caution with other materials. Gamers Guild AZ is not responsible for damage to this tool for use with non-recommended materials. The legendary GodHand SPN-120 Ultimate Nipper itself! For the smoothest cut you'll ever get for your model kit needs.
$59.95
-
Warhammer: Wound Trackers (Black & Ivory)
Contents:1Â Wound Tracker Cube (Black & ivory)
$14.99$12.74
-
Gamemaster: Hot Wire Foam Cutter
This incredibly precise Hot Wire Foam Cutter will give you clean, accurate and fast cuts - every time! It is the perfect tool for cutting XPS foam sheets for any dungeon backdrop, wargaming terrain, or landscape scenery.Batteries not included.Details:4 extra cutting wires includedUltra precise cuttingPowered by 2 C-Batteries (Not included)Hold activation button to quickly heat wire to 300°Move slow for precise cuts - and to protect wireMax cut size: 4cm x 12cm / 1.5" x 4.7"
$19.99$13.94
-
$6.99$5.94
-
Warhammer: Wound Trackers (Black & White)
Contents:1Â Wound Tracker Cube (Black & white)
$14.99$12.74
-
Warhammer: Wound Trackers (Black & Blue)
Contents:1Â Wound Tracker Cube (Black & blue)
$14.99$12.74
-
Warhammer: 12mm Dice Cube (Grey)
Contents:1 Dice Cube (Grey)
$12.50$10.63
-
$9.99$8.49
-
Tamiya: Square Bottle Holder 40ml
Cement or other modeling aids accidentally spilling across your workbench could spell danger for your model and other materials. Reduce the risk of accidents with this simple sponge holder, which is designed to fit snugly around the 40ml square bottles used for Tamiya Cement and other products, limiting the chance of them falling over if knocked.• Bottle Holder x1• Use the included tab to link multiple holders together.• Material: PE sponge• Dimensions: 80mm x 80mm x 12mm
$2.37
-
$14.99$12.74
-
$6.99$5.94
-
Minecraft Eraser
Mystery Minecraft eraser pack. Each pack contains 1 eraser.
$3.34
-
$6.99$5.94
-
GodHand: GH-PN-120- L (Left Handed) Blade One Nipper
This product is intended for use with soft plastics, such as Bandai Model Kits. Please use with extreme caution with other materials. Gamers Guild AZ is not responsible for damage to this tool for use with non-recommended materials. This one is the for the lefties out there. The legendary GodHand SPN-120 Ultimate Nipper itself! For the smoothest cut you'll ever get for your model kit needs.
$62.30
-
$6.99$5.94
You have seen 48 out of 161 products