Paint & Hobby | Tools
Citadel: Tools - Water Pot
The water pot is 100mm wide at its base, and 90mm tall.
$11.25$9.56
-
Citadel: Tools - Tape Measure
A tape measure, extends to 10ft/120", is marked in both centimeters and inches, features an auto-locking blade.
$10.00$8.50
-
Citadel: Tools - Palette Pad
The Citadel Palette Pad contains 20 disposable painting palettes. The plastic paper pages that form each palette are bound together on one edge. Once you have finished using a palette simply tear it out of the pad and pop it in the bin. No more washing!
$12.25$10.41
-
Citadel: Tools - 2022 Mouldline Remover
This version of the Mouldline Remover includes a number of improved features: – Longer and thinner nose, roughly half the size of the previous version, reaches every nook and cranny while increasing visibility and precision– Ergonomic handle is tapered in the front, allowing you to change to a pencil-like control grip for fine work, with a chunky base to allow greater comfort and reduce hand fatigue during normal use– Notched back designed to clean up the tapered edges of your bases, making it quick and easy to get a paint-ready finish
$26.00$22.10
-
Citadel: Tools - Assembly Stand
This wide, stable base features a snug holder to keep a Painting Handle or Painting Handle XL secure and safe while you work. You'll also find two flexible yet sturdy assembly arms with rubberised jaws to hold components in place while the glue cures, making assembly easier than ever. Several shallow trays along the base allow you to collect the various bits and bobs that tend to pile up as you work.This assembly base is compatible with the newer, ergonomic design of the Citadel Colour Painting Handle, and the older decagonal handle will not fit in the central holder.
$28.00$23.80
-
Citadel: Tools - 2022 Drill
This hobby drill was redesigned to make it easier and safer to use by incorporating a number of design features: – Designed primarily in a light-weight hard plastic to reduce hand fatigue– Ergonomic shape incorporating ridges and grooves increases control and allows you to safely exert pressure– Bit-securing barrel is recessed into the handle, so it won’t unscrew during use– Freely rotating end cap allowing you to push down gently and rotate at the same time– Includes four bits in two sizes, perfect for a wide variety of Citadel model kits, stored in their own container when not in use
$35.00$29.75
-
Citadel: Tools - 2022 Super Fine Detail Cutters
This new set of Super Fine Detail Cutters includes a number of improved features: – Ultra thin blades (about three times smaller than the previous model) allow you to get into tight spaces with ease, increasing visibility and control– Blades meet perfectly flush on the back, reducing the amount of additional cleanup needed and reducing the risk of pieces pinging away when used properly– Bump-stopping design makes it impossible to mash the blades together with too much pressure, which means they’ll stay sharp for longer– Rubberised contoured handles, including flares near the blades for added control, precision, and safety.– Extended handles to reduce the pressure required to make a cut, reducing hand fatigue
$52.00$44.20
-
Citadel: Tools - File Set
Files are used to remove the small imperfections that may be created when you cut the model from it’s frame. This set contains two files; one rough and one fine. Both are half round in shape and feature a fine point, enabling you to file down and polish your miniature to a perfect finish.
$23.00$19.55
-
Citadel: Tools - 2022 Knife
This knife features a fully sculpted hard plastic handle, and incorporates a number of clever features for safety and convenience: – Fixed single slot blade barrel, ensuring perfect alignment– Ribbed shroud behind the blade, allowing safer downward pressure and maximum precision– Ergonomic handle to reduce hand fatigue, and prevent rolling on your desk– Back-weighted design, so it’s less likely to fall with the blade down– Blade changing thread recessed into the handle so the blade doesn’t loosen during use– Blade capThe Citadel Tools Knife also comes with a pack of six replacement blades in a container.
$35.00$29.75
-
Warhammer: 12mm Dice Cube (Black)
Contents:1 Dice Cube (Black)
$12.50$10.63
-
Citadel: Case - Crusade Figure Case
The Citadel Figure Cases are the perfect way to transport and protect your Citadel miniatures. Containing one set of our revolutionary channel foam, the Citadel Crusade Figure Case has been specially designed to fit almost any model that we make, any shape and size, quickly and easily without the chore of cutting and shaping to fit.Packing and unpacking the case is absurdly quick and easy; any model, however pointy, placed anywhere within the channels will be protected as well as if you’d spent countless hours hacking away at a custom fit. You’ll free up more time to concentrate on games, painting or just showing off your miniatures collection. The channel foam is as efficient a use of space as possible, allowing you to store more models more safely than any other case. Have a look at the images or check out the video in the tab to the right to to get a taste for just how life-changingly excellent these cases are - you won’t be able to work out how you lived without them. It’s ok. Those dark times are over now.We know that you want the best protection for your miniatures - the foam inside the case is slightly larger than the case itself, and will compress around the figures when closed, ensuring a minimum of movement for any miniature.. It also has nylon catches, so if you should drop it the catches won’t break. To ensure the robustness of the stress points, a metal hinge runs along the back, strengthening and adding a reassuring weightiness.We’ve put a lot of effort and research into making the case as comfortable as possible to transport, with ergonomically-designed handles for maximum grip - and the lid locks open, meaning no terrible accidents crushing your beloved miniatures on the gaming table. The Citadel Crusade Figure Case also comes with a padded shoulder strap, making it even easier to transport. -Games Workshop
$194.00$164.90
-
Warhammer: 12mm Dice Cube (Red)
Contents:1 Dice Cube (Red)
$12.50$10.63
-
Warhammer: 12mm Dice Cube (Green)
Contents:1 Dice Cube (Green)
$12.50$10.63
-
Warhammer: 12mm Dice Cube (Grey)
Contents:1 Dice Cube (Grey)
$12.50$10.63
-
$14.99$12.74
-
Citadel: Case - Stormvault Skirmish Case
The case is lined with smooth silicone bristles that close together with the lid and grip your miniatures in place securely, protecting them from damage. The two halves allow you to use one side like a tray to place models in before sealing the case with the other, using the clips located around the edge, and each half of the case features a rubber top to help prevent it from falling or sliding off a table.The bristles are precisely spaced to hold any type of miniature on a 25-40mm round base and up to a 75mm oval base. The bristles have been designed to follow the path of least resistance, moving around even the thinnest piece of plastic, and are completely smooth, so there is no snagging, even with the pointiest spear or a delicate leaf.Measuring 278x220x41.5mm, the Stormvault Skirmish Case is an ideal way to carry a Kill Team squad, Warcry warband, Blood Bowl team, Necromunda gang, Warhammer Underworlds warband, or any small, but elite, force of miniatures.
$60.00$51.00
-
$8.99$7.64
-
$10.00$8.50
-
$8.99$7.64
-
$5.99$5.09
-
$10.00$8.50
-
Citadel: Tools - Painting Handle
The painting handle holds 25mm, 28mm, 32mm and 40mm bases.
$12.50$10.63
-
Citadel: Tools - Painting Handle XL
The Citadel Colour Painting Handle XL features a well-balanced, ergonomic base that fits comfortably in the palm of your hand, allowing you to paint longer with less strain. The massive spring-loaded clip securely grips bases ranging from 50mm all the way up to 170mm oval bases – that’s the largest standard base you’ll find in the current range!The Painting Handle XL has been expertly designed to work with a range of modular hobby tools to enhance your painting and modelling experience. The base slots securely into the Citadel Colour Assembly Stand to keep even the largest models secure while you work.The flexible arms from the Assembly Stand also fit neatly into eight sockets located around the edges of the extra-large clip, allowing you to keep components in place while you build models. The same sockets are also sized to accommodate Sub-assembly Holders, so you can keep your colours consistent even when painting large, complicated projects.Miniatures displayed in images are for scale purposes only and are not included with this product. -Games Workshop
$18.00$15.30
-
Citadel: Tools - Spray Stick
The concept of the Citadel Colour Spray Stick is simple. You use the elastic bands to pin your models in place on the rotating head while you securely hold the pistol-grip handle. The slim, roomy design gives you unfettered access to every nook and cranny of your miniatures, allowing you to spray up to 10 models faster and more thoroughly than ever. The Spray Stick can securely hold bases up to 65mm round.The Spray Stick will quickly become an essential tool once you’ve tried it, keeping your hands clean(er) during the messy process of undercoating.It’s been expertly designed to work with the new range of modular hobby tools to enhance your painting and modelling experience. The circular sockets at the ends of each arm are perfectly sized to accommodate Sub-assembly Holders, allowing you to spray those fiddly bits right alongside the rest of the model for consistent finish and coverage. You’ll find an extra set of sturdy elastic bands in the package, which will last for many a happy project.-Games Workshop
$24.00$20.40
-
Citadel: Tools - Sub-Assembly Holder
The Citadel Colour Sub-Assembly Holder contains 44 expertly-designed Part Holders. They're made of the same plastic as Citadel models, which means you can drill small holes or use glue to attach the pegs, before simply clipping the bits off when you're finished.You'll also get two fluted bases for the Part Holders, which fit neatly into the Citadel Colour Painting Handle for comfortable painting sessions.
$12.50$10.63
-
Warhammer: 12mm Dice Cube (Blue)
Contents:1 Dice Cube (Blue)
$12.50$10.63
-
Warhammer: 12mm Dice Cube (White)
Contents:1 Dice Cube (White)
$12.50$10.63
-
Citadel: Case - Battle Figure Case
The Citadel Figure Cases are the perfect way to transport and protect your Citadel miniatures. Containing one set of our revolutionary channel foam, the Citadel Battle Figure Case has been specially designed to fit almost any model that we make, any shape and size, quickly and easily without the chore of cutting and shaping to fit.Packing and unpacking the case is absurdly quick and easy; any model, however pointy, placed anywhere within the channels will be protected as well as if you’d spent countless hours hacking away at a custom fit. You’ll free up more time to concentrate on games, painting or just showing off your miniatures collection. The channel foam is as efficient a use of space as possible, allowing you to store more models more safely than any other case. You won’t be able to work out how you lived without them. It’s ok. Those dark times are over now.We know that you want the best protection for your miniatures - the foam inside the case is slightly larger than the case itself, and will compress around the figures when closed, ensuring a minimum of movement for any miniature.. It also has nylon catches, so if you should drop it the catches won’t break. To ensure the robustness of the stress points, a metal hinge runs along the back, strengthening and adding a reassuring weightiness.. We also know that space can be at a premium when storing models, so the Skirmish and Battle cases have been designed to stack on top of each other for easy storage.We’ve put a lot of effort and research into making the case as comfortable as possible to transport, with ergonomically-designed handles for maximum grip - and the lid locks open, meaning no terrible accidents crushing your beloved miniatures on the gaming table. -Games Workshop
$112.00$95.20
-
Citadel: Case - Skirmish Figure Case
The Citadel Skirmish Figure Case has been specially designed to fit almost any model that we make, any shape and size, quickly and easily without the chore of cutting and shaping to fit.
$70.00$59.50
