Paint & Hobby | Tools
GodHand: GH-KS10-P800 - Kamiyasu Sanding Stick #800-10mm
12 piece set of 10mm thick sanding sponges with a single grit size of #800 Sponges are harder than other Kamiyasu Sanding Sponges series, ideal for surface treatment. You can cut it into small pieces to polish small surfaces. The ink hardly oozes and is good for wet polish, too. Grit size: #800size(per piece)： approx. 20mm×35mm×10mmTotal amount: 12 pieces
$9.06
-
GodHand: GH-KS10-P600 - Kamiyasu Sanding Stick #600-10mm
12 piece set of 10mm thick sanding sponges with a single grit size of #600 Sponges are harder than other Kamiyasu Sanding Sponges series, ideal for surface treatment. You can cut it into small pieces to polish small surfaces. The ink hardly oozes and is good for wet polish, too. Grit size: #600size(per piece)： approx. 20mm×35mm×10mmTotal amount: 12 pieces
$9.06
-
GodHand: GH-KS10-P240 - Kamiyasu Sanding Stick #240-10mm
12 piece set of 10mm thick sanding sponges with a single grit size of #240 Sponges are harder than other Kamiyasu Sanding Sponges series, ideal for surface treatment. You can cut it into small pieces to polish small surfaces. The ink hardly oozes and is good for wet polish, too. Grit size: #240size(per piece)： approx. 20mm×35mm×10mmTotal amount: 12 pieces
$9.06
-
GodHand: GH-KPN-95 - Kids Nipper EX
Brand GodHand Material Plastic Color Red Handle Material Plastic Item Weight 50 Grams Specific Uses For Product Cutting Grip Type Ergonomic About this item Small, but smooth cutting makes cutting parts fun! Special single-edged nipper serious about usability and safety for children. The leather cap for storing is included. Moderate resilience of spring let children open and close smoothly with their hands. Blade stopper is equipped to prevent blade from breaking due to excessive force.
$46.56
-
GodHand: GH-BND-125-B - Sharaku Bending Pliers
This product is intended for use with soft plastics, such as Bandai Model Kits. Please use with extreme caution with other materials. Gamers Guild AZ is not responsible for damage to this tool for use with non-recommended materials.
$30.08
-
Pro Affix - Hobby Adhesive 1oz
Sometimes, you just have to stick it! Pro Affix is Monument's answer for the all-around hobby adhesive. Glue your plastic, resin, and metal together quickly and with a secure bond. Thick enough to allow for filling of small gaps in join lines, but thin enough to flow easily and not gum up your model. Pro Affix is a CA (cyanoacrylate) or "super" glue that is built to create the strongest bond with quick cure times to keep you in the zone while building your next project. 1oz bottle.
$7.50$6.75
-
GodHand: GH-KS10-P120 - Kamiyasu Sanding Stick #120-10mm
12 piece set of 10mm thick sanding sponges with a single grit size of #120 Sponges are harder than other Kamiyasu Sanding Sponges series, ideal for surface treatment. You can cut it into small pieces to polish small surfaces. The ink hardly oozes and is good for wet polish, too. Grit size: #120size(per piece)： approx. 20mm×35mm×10mmTotal amount: 12 pieces
$9.06
-
GodHand: Craft Grip Series CGP-130
This product is intended for use with soft plastics, such as Bandai Model Kits. Please use with extreme caution with other materials. Gamers Guild AZ is not responsible for damage to this tool for use with non-recommended materials. The GodHand CGP-130 Extra Fine Tip Lead Pliers are perfect for holding, processing, and fine work of extremely small parts! The Craft Grip series features a comfortable grip designed to fit into the palm of your hand. Convenient for assembling metal parts that you don't want to damage and making accessories. Overall length is 130mm, Tip size: Approximately 1mm.
$45.84
-
GodHand: GH-PN-135-M - Double-Edged Nipper for Plastic & Resin
Brand GodHand Material Plastic Color Red Handle Material Plastic Item Weight 50 Grams Specific Uses For Product Cutting Grip Type Ergonomic About this item Small, but smooth cutting makes cutting parts fun! Special single-edged nipper serious about usability and safety for children. The leather cap for storing is included. Moderate resilience of spring let children open and close smoothly with their hands. Blade stopper is equipped to prevent blade from breaking due to excessive force.
$70.61
-
GodHand: GH-LDP-140-M - Le-Dio Bent Nose Pliers
This product is intended for use with soft plastics, such as Bandai Model Kits. Please use with extreme caution with other materials. Gamers Guild AZ is not responsible for damage to this tool for use with non-recommended materials.
$31.52
-
GodHand: GH-BND-115-N - All-Purpose bending Pliers
This product is intended for use with soft plastics, such as Bandai Model Kits. Please use with extreme caution with other materials. Gamers Guild AZ is not responsible for damage to this tool for use with non-recommended materials.
$24.21
-
GodHand: GH-KF-5-S - KAMABOKO File (Half-Round File)
A small metal file that does not easily scratch the side of the reverse edge.Due to its shape, it does not bend and can be sharpened easily.The small size makes it easy to handle, and the high cutting force allows you to cut as desired. 5mm width Flat file Metal file Single Fine kamaboko File Cutting God hand KF-5-S 5mm
$52.63
-
GodHand: GH-DB-5A - Drill Bit Set of 5 (A)
Material Plastic Cutting Diameter 0.9 Millimeters Finish Type Uncoated Shank Type Straight Brand GodHand About this item The best drill blades specially for modeling and focusing on function to use with pin vise. The best length for using with pin vise. Smooth cutting obtuse angle edge. Obtuse angle Drill Bit drills smoothly, not shaky, and easy to drill almost perfect circle. Drill Bit set of 5, 0.5, 0.6, 0.7, 0.8, 0.9mm diameter.
$18.03
-
GodHand: GH-LDP-140-F - Le-Dio Pliers
This product is intended for use with soft plastics, such as Bandai Model Kits. Please use with extreme caution with other materials. Gamers Guild AZ is not responsible for damage to this tool for use with non-recommended materials.
$30.08
-
Warhammer: 12mm Dice Cube
Contents:1 Dice Cube of 12mm d6s
$12.50$10.63
-
GodHand: GH-PBQ - Quick Power Pin Vise
Pin Vise for 4mm hexagon shaft drill bits. Compatible with Quick Drill Bit Sets (GH-DBQ series)Just insert drill bit and fix it in place. Magnetic assist makes drill bit attach easily. Hexagon shank fits in tightly. No worry of wobbling or spinning.Slim swivel fits in your palm and prevents hand pain.A dimple on swivel allows more stable rotation. Available drill bit size: 4.0mm, hexagon shaftLength: approx. 80mmBody and handlel: BrassRubber grip: TPE
$44.91
-
GodHand: GH-DB-8C - Drill Bit for set of 5 (C)
This product is intended for use with soft plastics, such as Bandai Model Kits. Please use with extreme caution with other materials. Gamers Guild AZ is not responsible for damage to this tool for use with non-recommended materials. Includes drill bits for making precise holes for all your plastic model kit needs.
$27.91
-
GodHand: Magnifying Head Loupe
Head mounted magnifying glass for model building
$165.32
-
MonumenTOOLS - Hobby Nerd Cutting Mat
Hobby Nerds rejoice! We now have a cutting mat that fits directly into the Hobby GoBag! A double-sided, self-healing mat, with the HBY NRD logo on the top and solid black on the back. Great for any hobby project where you want to protect your work surface. 10" x 8" with rounded corners to fit precisely in the top lid of the GoBag. Never be without your proper tools again!
$9.25$8.33
-
MonumenTOOLS - Retractable Hobby Cutter Blades (x5)
A pack of 5 replacement blades for our MTL-003 Retractable Hobby Cutter.
$3.00$2.70
-
$5.99$3.77
-
GodHand: GH-GCM-B5-B Glass Cutter Mat
This small cutting mat (151mm x 227mm) is perfect for cutting decals out of their sheets on a smooth surface! You can make precise cuts without taking up too much space in your work station! This includes 6 rubber feet.
$27.09
-
GodHand: GH-KS2-P240 - Kamiyasu Sanding Stick #240-2mm
Sanding Sponge grade :#240 (thickness: 2mm) 5pieces ★2mm thickness fit to curved surface and sanding easily. Easy to be bent and can sand inverse R surface. Grade (Japan) #240Total amount: 5 pieces
$8.45
-
GodHand: GH-DB-8D - Drill Bit Set of 8 (D)
Material metal Finish Type Steel Shank Type Straight Brand GodHand Item dimensions L x W x H 0.2 x 3.74 x 9.06 inches About this item Drill bit set designed specifically for models Material: Special tool steel Primary Country of Manufacture: China Shaft diameter: 0.1 inch (3 mm) Drill Diameter: 0.08 inch (2.1 mm) / 0.09 inch (2.2 mm) / 0.1 inch (2.3 mm) / 0.1 inch (2.6 mm) / 0.1 inch (2.7 mm) / 0.1 inch (2.8 mm) / 0.1
$27.09
-
PBS-DC ? Drill Bit ”Make Holes” Set
This product is intended for use with soft plastics, such as Bandai Model Kits. Please use with extreme caution with other materials. Gamers Guild AZ is not responsible for damage to this tool for use with non-recommended materials. Includes drill bits for making precise holes for all your plastic model kit needs.
$116.70
-
GodHand: Double Stick Tape for FF Acrylic Board
Double-sided sticky tape from GodHand for use with their sanding boards. Each roll is 15mm wide and 30 meters in length.
$26.37
-
GodHand: GH-KS2-P120 - Kamiyasu Sanding Stick #120-2mm
Sanding Sponge grade :#120 (thickness: 2mm) 5pieces ★2mm thickness fit to curved surface and sanding easily. Easy to be bent and can sand inverse R surface. Grade (Japan) #120Total amount: 5 pieces
$8.45
-
GodHand: GH-KS-SP - Kamiyasu Special Assortment Set
Long-lasting cutting power. Highly durable sanding sponges. Assorted set best for roughing and shaping. The GodHand Kamiyasu Special Assortment Set features varying thicknesses with firm textures, ideal for flattening and shaving loose surfaces. The sanding sponge is made of a highly durable fabric file. Unlike sandpaper, the fabric file is general-purpose and applicable to various situations, such as surface processing of curved and flat surfaces. The sanding sponges are color-coded and number-printed for easy identification. They are printed with water-resistant ink, which does not dissolve easily during wet sanding. Product Details: Thickness: approx. 2mm, 3mm, and 5mm Grades: #120, #240, #400, #600, #800, #1000, #2000, #4000, #6000, #8000, #10000 Includes 33 pieces (1 piece of each grit and thickness combination) ⚠NOTE Soaking in water for a long time or exposure to solvents such as lacquer may cause the adhesive to dissolve and peel off Please keep out of reach of children Please wear protective glasses and a dust mask during use Scratches and dirt on the file surface are not a problem in use Please note that printing may peel off if used with excessive force
$19.67
-
Army Painter: Tools - Miniature & Model Magnets
These supercharged and rare-earth magnets are made from very high grade & strength (N52), enabling you to do all kinds of conversions, everything from complex to just simply magnetize different weapons to your models. A very handy and versatile tool to alter your minis. A perfect companion to Miniature and Model Drill and Drill Bits. Magnet size:20 magnets = 5x1 mm80 magnets = 3x1 mm
$13.25$8.91
-
Army Painter: Tools - Hobby Knife
The Hobby Knife is essentially a surgical scalpel made for miniatures. Razor sharp and very precise, it is a fundamental tool for all wargamers.Includes 5 extra blades.
$11.99$7.92
-
Army Painter: Tools - Hydro Pack
The perfect top up pack for The Army Painter Wet Palette. This Hydro Pack contains 50x pieces of Hydro sheets and 2x pieces of air-tight Hydro foams.Note: The Hydro Pack is a refill set for the Wet Palette. Complete refill package – In this Hydro Pack you get a complete set of 50 Hydro Palette Paper Sheets and 2 Hydro Wet Palette Sponges Keep your paints fresh and ready – Whether you tend to use paints straight out of the bottle, or you mix a lot, our wet palette for acrylic painting will keep your acrylic Warpaints wet and fresh Hydro sheet membranes for perfect moisture level – Our Hydro Sheets for acrylic palette are designed specifically for allowing the ideal amount of water to seep into our acrylic Warpaints
$11.99$8.46
-
Army Painter: Tools - Sculpting Tools
These sculpting tools, when used in conjunction with Green Stuff, offer the modeling hobbyist a range of different shapes for any sculpting project.Keep away from children.
$13.99$8.96
-
Army Painter: Tools - Plastic Frame Cutter
The Plastic Frame Cutter is sharp, thin and precise. With this specialized tool you can cut your models from the sprue with ease and precision. It is ideal for trimming and converting all plastic models and miniatures.Keep away from children.
$14.25$9.46
-
Army Painter: Tools - Markerlight Laser Pointer
The TRUE LINE OF SIGHT can be very hard to establish and can lead to discussions at the gaming table. Well, no more. The compact Markerlight Laser Pointer will show you exactly what your models can see - no matter the terrain or battlefield - making it an absolute invaluable tool for Wargaming. Three batteries are included.Warning: Do not look directly at laser lights.
$13.25$10.70
-
Pro Acryl: Tools - Mini Agitators
5mm glass agitators, made from laboratory grade glass! Green, mean, agitating machines. Our balls are squeaky clean, contaminate free, and totally non threatening. Completely inert, so no risk of rust or damage to your paints. Sold in packs of 50. *We recommend adding 2 balls to each of your paints for best results.
$2.50$2.25
-
Army Painter: Tools - Self-Healing Cutting Mat
The Army Painter Self-Healing Cutting Mat not only protects the surface of your work area but also protects your knife and scalpel blades against dulling. This cutting mate is very easy to use. Simply place it at your preferred work area. Place the object you need to cut on the mat and cut with a motion aiming towards the mat. The mat is easy to clean using a damp cloth and continues to provide a level, even surface even after hundreds of cuts.
$10.99$8.51
-
Army Painter: Tools - Drill Bits
This premium set gives you 10 drill bits in 8 different sizes.Contents:0.7mm Bit x20.9mm Bit x21.0mm Bit x11.2mm Bit x11.5mm Bit x12.0mm Bit x12.5mm Bit x13.0mm Bit x1
$12.25$8.32
-
Citadel: Tools - Palette Pad
The Citadel Palette Pad contains 20 disposable painting palettes. The plastic paper pages that form each palette are bound together on one edge. Once you have finished using a palette simply tear it out of the pad and pop it in the bin. No more washing!
$12.25$10.41
-
Army Painter: Tools - Miniature & Model Drill
The Drill is a well known and valuable tool for the converter and modeler. Drill holes in metal, resin, and plastic miniatures with the drill bits provided.Three drill bits are included:1.0mm1.4mm1.8mm
$14.99$9.15
-
Army Painter: Sets - Hobby Tool Kit
These diamond files are extremely versatile tools for the wargamer & hobbyist. A must-have for custom conversions and cleaning mold lines, as well as preparing pieces for gluing.Keep away from children.
$37.99$25.97
-
Army Painter: Tools - Rangefinder Tape Measure
This tape measure is an invaluable tool for playing most wargames. With both inches and centimers to measure and a 3 meter long tape - the Rangefinder will quickly measure any ranges on any normal size gaming table. Â
$7.99$6.59
-
Citadel: Tools - 2022 Drill
This hobby drill was redesigned to make it easier and safer to use by incorporating a number of design features: – Designed primarily in a light-weight hard plastic to reduce hand fatigue– Ergonomic shape incorporating ridges and grooves increases control and allows you to safely exert pressure– Bit-securing barrel is recessed into the handle, so it won’t unscrew during use– Freely rotating end cap allowing you to push down gently and rotate at the same time– Includes four bits in two sizes, perfect for a wide variety of Citadel model kits, stored in their own container when not in use
$35.00$29.75
-
Army Painter: Tools - Wet Palette Hydro Bundle
The Wet Palette Hydro Bundle combines our fan-favourite Wet Palette with a convenient refill package, all in one set!The Wet Palette is a must-have for miniature painters as it keeps your paints hydrated and workable for extended periods of time. This means you can work on your models and miniature figures for longer without having to constantly remix or waste paint. It is also the perfect tool for colour blending and mixing your own colours.Contents• Wet Palette• 4 x Hydro Foams• 100 x Hydro Sheets
$44.98$38.23
-
Minecraft Eraser
Mystery Minecraft eraser pack. Each pack contains 1 eraser.
$3.34
-
Warhammer: Wound Trackers (Black & Ivory)
Contents:1Â Wound Tracker Cube (Black & ivory)
$14.99$12.74
-
Warhammer: Wound Trackers (Black & White)
Contents:1Â Wound Tracker Cube (Black & white)
$14.99$12.74
-
Citadel: Case - Skirmish Figure Case
The Citadel Skirmish Figure Case has been specially designed to fit almost any model that we make, any shape and size, quickly and easily without the chore of cutting and shaping to fit.
$70.00$59.50
-
Citadel: Case - Battle Figure Case (2025)
The Warhammer Figure Cases are ideal for transporting and protecting your miniatures. Containing two sets of our revolutionary channel foam, the Warhammer Battle Figure Case has been specially designed to fit almost any model we make, any shape and size, quickly and easily, without any cutting and shaping to fit.Packing and unpacking the case is absurdly quick and easy – any model, however pointy, placed anywhere within the channels will be protected as well as if you’d spent countless hours hacking away at a custom fit. You’ll free up more time to concentrate on games, painting, or just showing off your miniatures collection. The channel foam is as efficient a use of space as possible, allowing you to store more models more safely than any other case.We know that you want the best protection for your miniatures – the foam inside the case is slightly larger than the case itself and will compress around the figures when closed, ensuring minimal movement for any miniature. It also has nylon catches, so if you should drop it, the catches won't break. To ensure the robustness of the stress points, a metal hinge runs along the back, strengthening and adding a reassuring weightiness. We also know space can be at a premium when storing models, so the Skirmish and Battle cases have been designed to stack on top of each other for easy storage.We've put a lot of effort and research into making the case as comfortable as possible to transport. It has ergonomically designed handles for maximum grip, and the lid locks open, meaning no terrible accidents crushing your beloved miniatures on the gaming table.The Warhammer Battle Case measures 32(w) x 22 (d) x 26 (h)cm.
$112.00$96.90
You have seen 96 out of 97 products